Saddle Stitcher SD-513

Type

Saddle-System Stitch Book Binder

Output method

Secondary (sub) tray output

Outputs paper to the sub tray without performing processing (however, when Trimmer Unit TU-503 or Creaser Unit CR-101 is mounted on the machine, 2-side slitting or crease processing is performed).

Straight output

Outputs paper to another finishing equipment without performing processing (however, when Trimmer Unit TU-503 or Creaser Unit CR-101 is mounted on the machine, 2-side slitting or crease processing is performed).

Fold&Staple

Performs Fold & Staple, and outputs paper to the bundle exit tray.

Fold & Staple + Trimming

Performs Fold & Staple and edge trimming, then outputs paper to the bundle exit tray.

Multi Half-Fold

Folds a single or multiple sheets in half, and outputs them to the bundle exit tray.

Multi Tri-Fold

Folds a single or multiple sheets in three, and outputs them to the Multi tri-fold mode tray.

Crease

Mounting Creaser Unit CR-101 allows you to perform Fold & Staple, Half-Fold, or Tri-Fold for the creased sheets. The folded sheets are output to the sub tray.

2-Side Slitting

Mounting Trimmer Unit TU-503 allows you to perform Fold & Staple, Half-Fold, or Tri-Fold for the sheets with both sides trimmed. The folded sheets are output to the sub tray.

Spine Corner Forming

Mounting Folding Unit FD-504 allows you to flatten the spine of the folded and stapled booklet.

Fold

Fold type

Multi Half-Fold, Multi Tri-Fold (When combined with Crease or 2-Side Slitting, Multi Fold is released.)

Paper size

• Multi Half-Fold

Standard: A3 short edge feed, B4 short edge feed, A4 short edge feed, B5 short edge feed, Foolscap, SRA3 short edge feed, SRA4 short edge feed, 12  18 short edge feed, 11  17 short edge feed, 8.5  14 short edge feed, 8.5  11 short edge feed, 7.25  10.5 short edge feed, 8K short edge feed, 16K short edge feed

Custom: Widthwise 120 mm to 331 mm, Lengthwise 257 mm to 488 mm / Widthwise 4.72" to 13.03", Lengthwise 10.12" to 19.21"

Wide paper

• Multi Tri-Fold

Standard: A4 short edge feed, 8.5 11 short edge feed

Paper weight

• Multi Half-Fold: 50 g/m² to 300 g/m² / 13 lb Bond to 81 lb Bond

• Multi Tri-Fold: 50 g/m² to 91 g/m² / 13 lb Bond to 24 lb Bond

• Multi Tri-Fold combined with Crease (with Multi Fold released): 106 g/m² to 216 g/m² / 29 lb Bond to 57 lb Bond

Maximum number of sheets per folded set

• Multi Half-Fold

5 sheets (50 g/m² to 81 g/m² / 13 lb Bond to 22 lb Bond)

3 sheets (82 g/m² to 130 g/m² / 23 lb Bond to 34 lb Bond)

1 sheet (131 g/m² to 300 g/m² / 36 lb Bond to 81 lb Bond)

• Multi Tri-Fold

5 sheets (50 g/m² to 81 g/m² / 13 lb Bond to 22 lb Bond)

3 sheets (82 g/m² to 91 g/m² / 23 lb Bond to 24 lb Bond)

- Tri-Fold with crease

1 sheet (106 g/m² to 216 g/m² / 29 lb Bond to 57 lb Bond)

Paper tray capacity

- Multi Half-Fold: 30 sets (with the full-load detection function)

- Multi Tri-Fold:

1 sheets folded: 40 sets

2 sheets folded: 20 sets

3 sheets folded: 13 sets

4 sheets folded: 10 sets

5 sheets folded: 8 sets

(80 g/m² / 21 lb Bond, with full load sensor)

Fold & Staple/Trimming

Paper size

Standard: A3 short edge feed, B4 short edge feed, A4 short edge feed, B5 short edge feed, Foolscap, SRA3 short edge feed, SRA4 short edge feed, 12  18 short edge feed, 11  17 short edge feed, 8.5  14 short edge feed, 8.5  11 short edge feed, 7.25  10.5 short edge feed, 8K short edge feed, 16K short edge feed

Custom: Widthwise 120 mm to 331 mm, Lengthwise 257 mm to 488 mm / Widthwise 4.72" to 13.03", Lengthwise 10.12" to 19.21"

Wide paper

Paper weight

50 g/m² to 300 g/m² / 13 lb Bond to 81 lb Bond

Staple position

Variable (54 mm to 185.5 mm / 2.36" to 6.53")

Maximum folding and stapling capacity

Max. 50 sheets (Plain, Fine: 50 g/m² to 64 g/m² / 13 lb Bond to 17 lb Bond)

The maximum number of stapled and folded sheets varies depending on paper types. For details, refer to the table shown in Saddle Stitcher SD-513 processing capacity.

Trimming capacity

Maximum number of stapled and folded sheets x2

Paper tray capacity

Refer to the table shown in Capacity.

Straight output / Sub tray output

Paper size

Standard: A3 short edge feed, B4 short edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed, A5 short edge feed/long edge feed, B6 short edge feed, Foolscap, SRA3 short edge feed, SRA4 short edge feed/long edge feed, A6 short edge feed, 13  19 short edge feed, 12  18 short edge feed, 11  17 short edge feed, 8.5  14 short edge feed, 8.5  11 short edge feed/long edge feed, 5.5  8.5 short edge feed/long edge feed, 9  11 long edge feed, 7.25  10.5 short edge feed/long edge feed, 8K short edge feed, 16K short edge feed/long edge feed

Custom: Widthwise 95 mm to 331 mm, Lengthwise 133 mm to 488 mm / Widthwise 3.74" to 13.03", Lengthwise 5.24" to 19.21"

Wide paper

Tab paper (only with the tab side ahead in output direction)

Paper weight

40 g/m² to 400 g/m² / 11 lb Bond to 106 lb Bond

When the stack capacity is 49 g/m² / 13 lb Bond or less, it is not covered under warranty.

* 351 g/m² to 400 g/m² / 94 lb Bond to 106 lb Bond: The paper types are limited.

Paper tray capacity

Height (full load is detected with the sensor): approx. 30 mm / 1.18", 200 sheets (80 g/m² / 21 lb Bond)

Z-Fold: 20 sheets (80 g/m² / 21 lb Bond)

Half-Fold: 20 sheets (80 g/m² / 21 lb Bond)

Dimensions

Single unit: 1,241* mm (W) 1,431 mm (D) 1,020 mm (H) / 48.86" (W)  56.34" (D)  40.16" (H)

*: Excluding the booklet tray part, 236 mm / 9.29"

Rear console unit: 1,241 mm (W) 723 mm (D) 1,020 mm (H) / 48.86" (W)  28.46" (D)  40.16" (H)

Front console unit: 800 mm (W)  830 mm (D)  1,020 mm (H) / 31.50" (W)  32.68" (D)  40.16" (H)

Weight

337 kg / 742.96 lb

Power source

Metric area: AC 230 V (via power cord)
Inch area: AC 115 V (via power cord)

DC24V, 5V (partially supplied from the equipment connected previously to the unit)

Power consumption

350 W